Summer Maintenance for Magnetic Levitation Air Compressors

1. Daily Maintenance

1) Water Cooling System

★ Ensure the machine room is well ventilated and the ambient temperature does not exceed 40°C.

★ Check the cooling tower's operating status daily.

★ Check the water pressure, quality, and flow rate of the cooling water system (water-cooled models).

★ Clean dust and debris from the Y-type filter (recommended weekly).

★ Check the coolant tank level.

2) Air Cooling System

★ Check the condition of the filter pads in the cooling air intake grille.

★ Check the motor cooling fan.

★ Check the skid-mounted cooling fan.

3) Electrical System

★ Clean dust from the control cabinet.

★ Check all electrical connections for looseness.

★ Check the inverter's heat dissipation.

2. Seasonal Professional Maintenance

1) Cooling System Optimization

★ Consider adding temporary ventilation facilities.

★ Check and clean all ventilation ducts.

★ Evaluate whether the cooling system capacity meets summer requirements.

2) Electrical Protection.

★ Check the effectiveness of moisture-proofing measures.

★ Add dehumidification equipment if necessary.

★ Check the grounding system resistance.

★ Provide rain protection around and on top of the air compressor.

3) Operating Parameter Adjustment.

★ Adjust protection thresholds based on ambient temperature.

★ Consider reducing the maximum load factor as appropriate.

4) Deep Cleaning.

★ Clean the air cooler and plate heat exchanger.

★ Clean the inverter water cooling system.

3. Emergency Procedures.

1) Immediately shut down the unit if any of the following conditions occur:

★ Smoke or a burning smell.

★ Abnormal vibration or noise.

★ Temperature exceeding the maximum allowable value.

★ Unable to reset the control system alarm.