Latest News About AIRKING

Refrigerated Air Dryer VS Adsorption Air DryerNo More Confusion in ChoosingHow to choose between refrigerated dryer and adsorption dryer?The air compression process produces a lot of moisture. Using a dryer to remove this moisture can not only extend the life of the air compressor but also reduce ma

When the operating current of an screw air compressor is high, troubleshoot as follows:1. Voltage Too High or Too LowThe normal voltage is 380V, with an error within 10%.2. Contactor Fails to Close TightlyFor a 50Hz - powered compressor, check if the contact points of the contactor are normal.3. Set

When an Screw air compressor fails to load, troubleshoot as follows:1. Inlet Valve Not OpenedCheck if the inlet valve opens during loading. See if there’s any foreign matter or if it’s stuck. Verify if the solenoid valve has power supply.2. Pressure or Temperature SensorCheck if the pressure or temp