Latest News About AIRKING

When the operating current of an screw air compressor is high, troubleshoot as follows:1. Voltage Too High or Too LowThe normal voltage is 380V, with an error within 10%.2. Contactor Fails to Close TightlyFor a 50Hz - powered compressor, check if the contact points of the contactor are normal.3. Set

When an Screw air compressor fails to load, troubleshoot as follows:1. Inlet Valve Not OpenedCheck if the inlet valve opens during loading. See if there’s any foreign matter or if it’s stuck. Verify if the solenoid valve has power supply.2. Pressure or Temperature SensorCheck if the pressure or temp

When an air compressor fails to start, troubleshoot as follows:1. Check Power SupplyInspect if the power supply incoming line is normal. Look for phase loss, phase sequence errors, and check if the voltage is too high or too low. Verify that the power cord and air switch meet the specifications.2. T